MBR工艺在西安经开草滩污水处理厂中的应用
- Title:
- Application of MBR in Caotan Wastewater Treatment Plant in Xi’an Economic Development District
- Keywords:
-
wastewater treatment plant
; MBR; A2O process; precise aeration technology;
- 摘要:
-
西安经开草滩污水处理厂设计规模为20×104 m3/d，设计出水水质为《城镇污水处理厂污染物排放标准》（GB 18918—2002）中的一级A标准，出水一部分排放至渭河，另一部分进入回用管网。因本项目规划用地仅10 hm2左右，且出水标准要求高，因此最终确定采用MBR工艺,工艺流程为预处理+A2O+MBR+接触消毒。吨水占地约0.399 m2/m3，平均吨水能耗约0.37 kW·h/m3。污水厂实际运行结果表明,出水水质优于设计标准,且MBR工艺与AVS精确曝气技术的结合切实解决了用地紧张、出水水质要求高、耐高负荷水质水量冲击等问题，降低了MBR工艺运行成本。
- Abstract:
-
The design treatment capacity of Caotan wastewater treatment plant in Xi ’an economic development district was 20×104 m3/d. The effluent quality was required to meet the first class level A standard of Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant（GB 18918-2002). One part of the effluent was discharged into Weihe River, the other part was put into the reused network. The planned land for this project was only about 10 hm2, while the reused water and effluent standards were relatively high. Therefore, MBR process was finally adopted as the main treatment unit. The treatment process was pretreatment unit+A2O+MBR+contact disinfection tank. The land coverage for every ton of water treated was about 0.399 m2/m3, and the average power consumption was about 0.37 kW·h/m3. The operation practice showed that the effluent quality was superior to the design standard. The effective combination of MBR process and AVS precise aeration technology solved the problems of land shortage, high effluent quality standard, resistance to the impact of high load raw water quality and quantity, and reduction of the overall operation cost of MBR process.
相似文献/References:
[1]孙永利,张维,郑兴灿,等.城镇居民人均日生活污水污染物产生量测算之产污规律[J].中国给水排水,2020,36(6):1.
[2]范荣桂,刘娜,尹利鹏,等.污泥厌氧催化快速发酵产VFAs的试验研究[J].中国给水排水,2020,36(11):69.
[3]镇祥华,余琴芳,万年红,等.污水处理厂二级出水深床滤池超深度脱氮研究[J].中国给水排水,2020,36(11):91.
[4]赵美玲,朱涛,冯江,等.水力模型在合流制调蓄池进水管改造中的应用[J].中国给水排水,2020,36(7):114.
[5]朱一文,王文亮.基于水文方法的暴雨调节塘规模计算[J].中国给水排水,2020,36(7):118.
[6]李骏飞,李欢,杨磊三.粤港澳大湾区创新治水模式分享[J].中国给水排水,2020,36(8):1.
[7]李激,王燕,熊红松,等.城镇污水处理厂消毒设施运行调研与优化策略[J].中国给水排水,2020,36(8):7.
[8]赵锡锋,李兴强,李军.好氧颗粒污泥技术中试研究及应用进展[J].中国给水排水,2020,36(8):30.
[9]王建西.PTA2O工艺用于养猪废水处理及其Anammox现象分析[J].中国给水排水,2020,36(8):56.
[10]莫俊锋,王文亮,白献宇,等.基于设计暴雨法的CSO调蓄池池容计算方法探讨[J].中国给水排水,2020,36(8):77.
[11]郭健.纳入大直径热力管的综合管廊设计研究[J].中国给水排水,2020,36(8):82.
[12]蒙政成,冼萍,黄付平,等.NCMBR工艺在工业园区污水处理工程中的应用[J].中国给水排水,2020,36(8):88.
[13]蒋彬,薛岳.工业废水与生活污水合并处理工程的改造与应用[J].中国给水排水,2020,36(8):92.