[1]李璐,潘名宾,龙程理,等.全过程应用BIM技术的改良AAO工艺大型污水厂的设计[J].中国给水排水,2020,36(12):101-105.
　LI Lu,PAN Ming-bin,LONG Cheng-li,et al.Design of Large Scale Wastewater Plant with Improved AAO Process Using BIM Technology in the Whole Process[J].China Water & Wastewater,2020,36(12):101-105.
点击复制

全过程应用BIM技术的改良AAO工艺大型污水厂的设计

中国给水排水[ISSN:1000-4062/CN:12-1073/TU] 卷: 第36卷 期数: 2020年第12期 页码: 101-105 栏目: 出版日期: 2020-06-17
Title:
Design of Large Scale Wastewater Plant with Improved AAO Process Using BIM Technology in the Whole Process
作者:
李璐1，潘名宾1，龙程理1，都雪晨1，杨墨1,2
1. 中国市政工程中南设计研究总院有限公司2. 哈尔滨工业大学环境学院
Author(s):
LI Lu， PAN Ming-bin， LONG Cheng-li ，DU Xue-chen， YANG Mo
Central and Southern China Municipal Engineering Design & Research Institute Co.Ltd. School of Environment,Harbin Institute of Technology
关键词:
font-size: 10pt; ">污水处理厂; BIM技术; 改良AAO
Keywords:
font-size: 10pt; ">wastewater treatment plant font-size: 10pt; ">; BIM technology; improved AAO
摘要:
武汉市某远城区污水处理厂规划控制规模为45×104 m3/d，一期工程规模为15×104 m3/d，设计出水水质执行《城镇污水处理厂污染物排放标准》（GB 18918—2002）一级A标准。污水处理采用改良AAO+高效澄清池+纤维转盘滤池+二氧化氯消毒工艺，污泥处理采用机械深度脱水工艺。从2019年9月—2020年1月运行数据看，处理效果较好，出水水质稳定且优于设计值。该污水处理厂全过程应用BIM技术并搭建智慧管控一体化平台。工程设计总投资约为3.70亿元，总成本及经营成本分别为1.20及0.83元/m3。
Abstract:
The planned treatment scale of a wastewater treatment plant in a remote urban area of Wuhan City was 45 ×104 m3/d, and the scale of the first phase project was 15×104 m3/d. The designed effluent quality was required in accordance with first class A standard of Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant (GB 18918-2002). The process of improved AAO + high efficiency clarifier + fiber rotary filter + chlorine dioxide disinfection was adopted for wastewater treatment. The process of mechanical deepdewatering was adopted for sludge treatment. From the operation data of September 2019 to January 2020, the treatment performance was good, the effluent quality was stable and better than the design value. The wastewater treatment plant had the characteristics of applying BIM technology in the whole process and building a smart integrated management and control platform. The total investment of the project was about 370 million yuan, and the total cost and operation cost were 1.20 yuan/m3 and 0.83 yuan/m3 respectively.

相似文献/References:

[1]孙永利,张维,郑兴灿,等.城镇居民人均日生活污水污染物产生量测算之产污规律[J].中国给水排水,2020,36(6):1.
[2]范荣桂,刘娜,尹利鹏,等.污泥厌氧催化快速发酵产VFAs的试验研究[J].中国给水排水,2020,36(11):69.
[3]镇祥华,余琴芳,万年红,等.污水处理厂二级出水深床滤池超深度脱氮研究[J].中国给水排水,2020,36(11):91.
[4]赵美玲,朱涛,冯江,等.水力模型在合流制调蓄池进水管改造中的应用[J].中国给水排水,2020,36(7):114.
[5]朱一文,王文亮.基于水文方法的暴雨调节塘规模计算[J].中国给水排水,2020,36(7):118.
[6]李骏飞,李欢,杨磊三.粤港澳大湾区创新治水模式分享[J].中国给水排水,2020,36(8):1.
[7]李激,王燕,熊红松,等.城镇污水处理厂消毒设施运行调研与优化策略[J].中国给水排水,2020,36(8):7.
[8]赵锡锋,李兴强,李军.好氧颗粒污泥技术中试研究及应用进展[J].中国给水排水,2020,36(8):30.
[9]王建西.PTA2O工艺用于养猪废水处理及其Anammox现象分析[J].中国给水排水,2020,36(8):56.
[10]高海英,邓磊,侯晓庆,等.MBR工艺在西安经开草滩污水处理厂中的应用[J].中国给水排水,2020,36(8):63.
[11]莫俊锋,王文亮,白献宇,等.基于设计暴雨法的CSO调蓄池池容计算方法探讨[J].中国给水排水,2020,36(8):77.
[12]郭健.纳入大直径热力管的综合管廊设计研究[J].中国给水排水,2020,36(8):82.
[13]蒙政成,冼萍,黄付平,等.NCMBR工艺在工业园区污水处理工程中的应用[J].中国给水排水,2020,36(8):88.

更新日期/Last Update: 2020-06-17