LI Yu-bin,LI Shu-hua.A Renovation Design Case of the A2O Biochemical Tank Transformed from BIOLAK Tank without Water Interruption[J].China Water & Wastewater,2020,36(20):129-132.
百乐克池不停水升级改造为A2O生化池工程设计
- Title:
- A Renovation Design Case of the A2O Biochemical Tank Transformed from BIOLAK Tank without Water Interruption
- Keywords:
- wastewater treatment plant; renovation without water interruption; A2O process; precast component
- 摘要:
- 长春市某污水处理厂设计规模为3×104 m3/d，原生化池采用百乐克处理技术，设计出水水质为《城镇污水处理厂污染物排放标准》(GB 18918—2002)一级B标准。现由于出水水质标准需提高至一级 A标准，故对污水厂进行提标改造。鉴于提标改造施工中污水厂不能停水，同时又需要对现有生化池进行改造，设计采用混凝土预制构件拼接成墙体在原百乐克池分隔出厌氧区、缺氧区、好氧区，将百乐克池改造成A2O生化池，并采用预制混凝土基础安装潜水搅拌机。经工程实践证明该设计是可行的，既满足了工艺运行的需求，同时预制构件的梯形结构形式也被证明是稳定可靠的。提标改造工程完成后，实际运行结果表明，出水水质能够稳定达到《城镇污水处理厂污染物排放标准》（GB 18918—2002）中一级A标准。
- Abstract:
- The design treatment capacity of a wastewater treatment plant in Changchun City is 30 000 m3/d, the original biochemical process adopted BIOLAK treatment technology, and the original designed effluent water quality was the first level B standard specified in Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant(GB 18918-2002). Due to the higher effluent water quality standard required to meet the first level A standard, it was needed to upgrade the plant. The wastewater treatment process operation could not be stopped, and the existing biochemical tank needed to be modified. In this design, precast concrete components were spliced into walls to separate the BIOLAK tank into anaerobic zone, anoxic zone and aerobic zone. BIOLAK tank was transformed into A2O biochemical tank. Precast concrete foundation was adopted to reconstruct and install submersible mixers. It was proved feasible by the upgrading and reconstruction project, which not only met the requirements of process operation, but also proved that the structure of precast concrete components was stable and reliable. After the completion of the upgrading and reconstruction project, actual operation results showed that the effluent quality could stably meet the first level A standard specified in Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant(GB 18918-2002).
相似文献/References:
[1]王 亮.马来西亚Pantai地埋式污水厂环网供配电结构设计[J].中国给水排水,2018,34(22):63.
WANG Liang.Power Supply and Distribution Structure Design of Ring Network for Pantai Underground Wastewater Treatment Plantin Malaysia[J].China Water & Wastewater,2018,34(20):63.
[2]侯晓庆,邓 磊,高海英,等.MBR工艺在神定河污水处理厂升级改造工程中的应用[J].中国给水排水,2018,34(22):66.
HOU Xiao-qing,DENG Lei,GAO Hai-ying,et al.Application of MBR Process in the Upgrading and Reconstruction Project of Shending River WastewaterTreatment Plant[J].China Water & Wastewater,2018,34(20):66.
[3]邱明海.北京市垡头污水处理厂改扩建工程设计技术方案[J].中国给水排水,2018,34(20):13.
QIU Ming hai.Reconstruction and Expansion Design Technical Plan of Beijing Fatou Wastewater Treatment Plant[J].China Water & Wastewater,2018,34(20):13.
[4]郝二成,郭毅,刘伟岩,等.基于数学模拟的污水厂运行分析——建模与体检[J].中国给水排水,2020,36(15):23.
HAO Er-cheng,GUO Yi,LIU Wei-yan,et al.Operation Analysis of Wastewater Treatment Plant Based on Mathematical Simulation: Modeling and Examination[J].China Water & Wastewater,2020,36(20):23.
[5]张月,王阳,张宏伟,等.阳泉市污水处理二期工程BARDENPHO工艺设计和运行[J].中国给水排水,2020,36(16):64.
ZHANG Yue,WANG Yang,ZHANG Hong-wei,et al.Design and Operation of BARDENPHO Process in Phase Ⅱ Project of Yangquan Wastewater Treatment Plant[J].China Water & Wastewater,2020,36(20):64.
[6]祝新军,蔡芝斌,姚斌,等.绍兴污水处理厂气浮设备的优化改造[J].中国给水排水,2020,36(16):101.
ZHU Xin-jun,CAI Zhi-bin,YAO Bin,et al.Optimization and Modification of Air Floatation Equipment in Shaoxing Wastewater Treatment Plant[J].China Water & Wastewater,2020,36(20):101.
[7]王文明,杨淇椋,蔡依廷,等.MSBR工艺在高排放标准污水处理厂的应用[J].中国给水排水,2020,36(16):111.
WANG Wen-ming,YANG Qi-liang,CAI Yi-ting,et al.Application of MSBR Process in Wastewater Treatment Plant with Stringent Discharge Standard[J].China Water & Wastewater,2020,36(20):111.
[8]郝二成,郭毅,刘伟岩,等.基于数学模拟的污水厂运行分析——控制与优化[J].中国给水排水,2020,36(17):23.
HAO Er-cheng,GUO Yi,LIU Wei-yan,et al.Operation Analysis of Wastewater Treatment Plant Based on Mathematical Simulation: Control and Optimization[J].China Water & Wastewater,2020,36(20):23.
[9]王阳,张月,王晓康,等.高排放标准下的改良AAO+深度处理工程案例[J].中国给水排水,2020,36(18):56.
WANG Yang,ZHANG Yue,WANG Xiao-kang,et al.Project Case of Modified AAO and Advanced Treatment Process under High Emission Standards[J].China Water & Wastewater,2020,36(20):56.
[10]郑枫,慕杨,孙逊.MBR工艺用于山东省某污水处理厂扩建工程[J].中国给水排水,2020,36(18):81.
ZHENG Feng,MU Yang,SUN Xun.MBR Process Used in Expansion Project of a Sewage Treatment Plant in Shandong Province[J].China Water & Wastewater,2020,36(20):81.