LOUHong-hai,LOUChao-gang,CHENWei,et al.Application of Three-dimensional Intensive Combined Technology in the Treatment and Reuse of Printing and Dyeing Wastewater[J].China Water & Wastewater,2024,40(2):115-119.
立体集约式组合工艺用于印染废水处理及回用
- Title:
- Application of Three-dimensional Intensive Combined Technology in the Treatment and Reuse of Printing and Dyeing Wastewater
- Keywords:
- printing and dyeing wastewater; land saving technology; three-dimensional intensive form; multistage AO; reuse
- 摘要:
- 针对印染废水的水质特点，引入竖向功能强化节地技术的理念，创新采用立体集约式“分类分质预处理+多级AO+双膜”组合工艺进行处理，有效解决了环保处理设施用地紧张的难题。结果表明，该组合工艺具有高效稳定、运行费用低及回用率高等优点，对COD、BOD5、TN、NH3-N和色度的平均去除率分别为92%、97%、80%、94%和85%，出水各项指标稳定达到《纺织染整工业水污染物排放标准》（GB 4287—2012）的间接排放标准，且回用水水质满足《纺织染整工业废水治理工程技术规范》（HJ 471—2020）中生产工艺用水水质要求，回用率达到62.5%。
- Abstract:
- Based on the characteristics of printing and dyeing wastewater quality, the concept of vertical functional strengthening and land saving technology is introduced, the innovative use of a three-dimensional intensive combined process of classification and quality pre-treatment, multistage AO, and double membrane, effectively solves the problem of land shortage for environmental protection treatment facilities. The results show that the combined process has the advantages of high efficiency and stability, low operating costs and high reuse rate. The average removal rates of COD, BOD5, TN, NH3-N and chroma are 92%, 97%, 80%, 94% and 85%, respectively. The effluent indicators stably meet the indirect discharge criteria in Discharge Standards of Water Pollutants for Dyeing and Finishing of Textile Industry (GB 4287-2012), the quality of the reused water meets the water quality requirements of production process water in Technical Specification for Dyeing and Finishing Wastewater Treatment of Textile Industry (HJ 471-2020), and the reuse rate reaches 62.5%.
相似文献/References:
[1]赵健忠,王学华,王浩,等.浙江某印染废水处理工程改造及分析[J].中国给水排水,2020,36(14):134.
ZHAO Jian-zhong,WANG Xue-hua,WANG Hao,et al.Reconstruction and Analysis of a Printing and Dyeing Wastewater Treatment Project in Zhejiang[J].China Water & Wastewater,2020,36(2):134.
[2]许晓明,刘宇心,闫萍,等.以工业废水为主的污水厂准Ⅳ类水质提标扩建工程设计[J].中国给水排水,2020,36(18):60.
XU Xiao-ming,LIU Yu xin,YAN Ping,et al.A Design Case of Upgrading and Expansion Project to Meet the Quasi-Ⅳ Class Standard in a WWTP with Industrial Wastewater as Its Major Influent[J].China Water & Wastewater,2020,36(2):60.
[3]尤鑫,万年红,雷培树,等.EBOTM升流式水解酸化池用于印染废水处理[J].中国给水排水,2021,37(10):138.
YOU Xin,WAN Nian-hong,LEI Pei-shu,et al.Treatment of Printing and Dyeing Wastewater by EBOTM Up-flow Hydrolytic Acidification Tank[J].China Water & Wastewater,2021,37(2):138.
[4]丁静,张建良,任烨,等.混凝+A/O+气浮+臭氧+磁混凝工艺处理印染废水[J].中国给水排水,2021,37(20):112.
DING Jing,ZHANG Jian-liang,REN Ye,et al.Treatment of Dyeing Wastewater by a Combined Process of Coagulation, A/O, Flotation, Ozone, and Magnetic Coagulation[J].China Water & Wastewater,2021,37(2):112.
[5]薛罡,何月玲,王晓暖,等.印染废水的硫自养反硝化深度脱氮中试研究[J].中国给水排水,2022,38(13):15.
XUEGang,HEYue-ling,WANGXiao-nuan,et al.Pilot Study of Sulfur-driven Autotrophic Denitrification for Advanced Nitrogen Removal in Secondary Effluent of Dyeing Wastewater[J].China Water & Wastewater,2022,38(2):15.