LONG Cheng-li,LI Lu,CHEN Yan-bo,et al.Application of BIM Technology in the Design of Wuhan Nanhu Initial Rainwater Treatment Plant[J].China Water & Wastewater,2021,37(18):82-87.
BIM技术在武汉南湖初雨处理厂设计中的应用
- Title:
- Application of BIM Technology in the Design of Wuhan Nanhu Initial Rainwater Treatment Plant
- Keywords:
- BIM; initial rainwater treatment plant; deep foundation pits; superimposed structure; green building analysis
- 摘要:
- 武汉南湖初雨处理厂是武汉市南湖水环境提升工程中的核心子项工程。初雨处理厂临湖布置，采用叠合结构半地埋的形式，存在临湖超大深基坑、工艺工况复杂、需要绿建模拟等设计难点。设计过程采用建筑信息模型（BIM）技术进行建模辅助设计，通过BIM应用使项目设计质量、协同沟通和设计周期等方面均得到了提升。阐述了项目设计过程BIM技术的相关重点应用及应用过程，为初雨处理厂的BIM设计提供经验。
- Abstract:
- Wuhan Nanhu initial rainwater treatment plant is the core sub-project of the South Lake water environment improvement project. The initial rainwater treatment plant is arranged next to the lake and adopts a superimposed structure semi-buried form. The project is facing several design difficulties, such as large and deep foundation pits adjacent to the lake, complex process conditions and green building analysis requirement. In the design process, building information modeling (BIM) technology was employed to assist the modeling design, and project design quality, collaborative communication and design cycle were improved through the application of BIM. Relevant key points and application process of BIM technology in the design process were summarized, which provides experience for BIM design of initial rainwater treatment plant.
相似文献/References:
[1]许乃星,陈奕,林显治,等.基于BIM技术的大尺度海绵城市建设三维模型快速创建[J].中国给水排水,2020,36(12):111.
XU Nai-xing,CHEN Yi,LIN Xian-zhi,et al.Research on 3D Model Rapid Creation of Large Scale Sponge City Construction Based on BIM Technology[J].China Water & Wastewater,2020,36(18):111.
[2]张杰.基于Civil 3D二次开发的市政管线综合BIM辅助设计[J].中国给水排水,2020,36(24):79.
ZHANG Jie.BIM Aided Design for Municipal Pipeline Integration Based on Civil 3D Secondary Development[J].China Water & Wastewater,2020,36(18):79.
[3]文雅,孟依柯,汪传跃,等.基于BIM平台的海绵城市系统优化设计及评估[J].中国给水排水,2021,37(12):98.
WEN Ya,MENG Yi-ke,WANG Chuan-yue,et al.Optimal Design and Assessment of Sponge City System Based on BIM[J].China Water & Wastewater,2021,37(18):98.
[4]张引玉.污水处理厂通水调试BIM可视化仿真系统应用[J].中国给水排水,2021,37(14):69.
ZHANG Yin-yu.Application of BIM Visualized Simulation System in Water Commissioning of Sewage Treatment Plant[J].China Water & Wastewater,2021,37(18):69.
[5]孙同谦,徐峥.BIM与GIS的协同应用对污水处理厂设计的启示[J].中国给水排水,2021,37(20):66.
SUN Tong-qian,XU Zheng.Inspiration from Collaborative Application of BIM and GIS in Design of Sewage Treatment Plant[J].China Water & Wastewater,2021,37(18):66.
[6]李兵,方玉妹,汪深.基于BIM技术的医院室外管网正向设计应用[J].中国给水排水,2021,37(20):71.
LI Bing,FANG Yu-mei,WANG Shen.Application of BIM Technology in Forward Design of Hospital Outdoor Pipe Network[J].China Water & Wastewater,2021,37(18):71.
[7]赵立佳,刘涛,汪波,等.BIM及数字化用于仙居县污水处理二期EPC工程[J].中国给水排水,2022,38(22):54.
ZHAOLi-jia,LIUTao,WANGBo,et al.Application of BIM and Digitalization Technologies in Xianju County Wastewater Treatment Plant Phase Ⅱ EPC Project[J].China Water & Wastewater,2022,38(18):54.