[1]林显增,张嘉明,梁翡珏,等.超滤膜深度处理水厂挖潜改造实例分析[J].中国给水排水,2025,41(12):84-89.
　LINXian-zeng,ZHANGJia-ming,LIANGFei-jue,et al.Case Analysis of Technical Transformation for Capacity Tapping of Ultra-filtration Membrane Advanced Treatment Waterworks[J].China Water & Wastewater,2025,41(12):84-89.
点击复制

超滤膜深度处理水厂挖潜改造实例分析

中国给水排水[ISSN:1000-4062/CN:12-1073/TU] 卷: 第41卷 期数: 2025年第12期 页码: 84-89 栏目: 出版日期: 2025-06-17
Title:
Case Analysis of Technical Transformation for Capacity Tapping of Ultra-filtration Membrane Advanced Treatment Waterworks
作者:
林显增1,2， 张嘉明2， 梁翡珏2， 伍文韬2， 梁金荣2， 黄建良2， 肖丹2， 瞿芳术1
（1.广州大学 土木与交通工程学院，广东 广州 510006；2.佛山市禅城区供水有限公司，广东 佛山 528000）
Author(s):
LIN　Xian-zeng1，2， ZHANG　Jia-ming2， LIANG　Fei-jue2， WU　Wen-tao2， LIANG　Jin-rong2， HUANG　Jian-liang2， XIAO　Dan2， QU　Fang-shu1
（1. School of Civil Engineering and Transportation， Guangzhou University， Guangzhou 510006， China； 2. Foshan City Chancheng Disrtict Water Supply Co. Ltd.， Foshan 528000， China）
关键词:
超滤膜;  活性炭过滤;  深度处理水厂;  产能挖潜;  自控程序优化
Keywords:
ultra-filtration membrane;  activated carbon filtration;  advanced treatment waterworks;  capacity tapping;  automatic control program optimization
摘要:
超滤膜是目前应用较为广泛的饮用水深度处理工艺之一。针对不具备扩建条件的超滤膜深度处理水厂产能提升需求，以南方地区某超滤膜深度处理水厂改造为例，通过更换抽吸泵，进一步释放超滤膜产能；新建清水箱及优化消毒剂投加，增加调蓄容积，并保持消毒剂均匀性；优化自控系统，建立工艺联动控制方式，提升自动化程度，实现活性炭罐与超滤膜池根据清水池液位自动开停，保持运行平稳，减少人工操作。改造后该水厂制水及供水能力挖潜提高15%，生产运行稳定达标，部分指标优于《生活饮用水卫生标准》（GB 5749—2022）、《饮用净水水质标准》（CJ 94—2005），总投资控制在260万元以内，基本实现少人值守，可为相关水厂挖潜改造提供借鉴。
Abstract:
Ultra-filtration membrane (UFM) is currently a widely used advanced treatment process. In response to the demand for capacity increase of UFM waterworks that does not have expansion conditions, taking the transformation of a UFM advanced treatment waterworks in the southern region as a case, the UFM capacity was further released by replacing the suction pump. New clean water tanks were built to increase the storage volume, and the disinfectant addition was optimized to maintain the uniformity of the disinfectant. The automatic control system was optimized to link the processes and to improve automation degree, so that the activated carbon tank and UFM tank could be automatically started and stopped according to the liquid level of the clean water tanks, for maintaining stable operation and reducing manual operation. After the transformation, the waterworks’ water production and water supply capacity have been tapped by 15%, and the production and operation have been stable and up to standard. Some indicators were superior to the Standards for Drinking Water Quality (GB 5749-2022), Water Quality Standards for Fine Drinking Water (CJ 94-2005). The total investment was controlled at 2.6 million yuan, and basically fewer people on duty have been achieved. It could provide technical reference for potential tapping and transformation of related waterworks.

相似文献/References:

[1]李都望,黄有文,管 浩,等.虹吸膜池在净水厂提标扩容中的工程实践[J].中国给水排水,2018,34(22):86.
　LI Du-wang,HUANG You-wen,GUAN Hao,et al.Engineering Practice of Siphon Membrane System in Upgrading and Capacity Expansion of Waterworks[J].China Water & Wastewater,2018,34(12):86.
[2]张娟,牛豫海,张自力,等.超滤膜短流程工艺处理南水北调原水的运行效能[J].中国给水排水,2020,36(23):37.
　ZHANG Juan,NIU Yu-hai,ZHANG Zi-li,et al.Operational Efficiency of Short-flow Ultrafiltration Process Treating Water from South-to-North Water Diversion Project[J].China Water & Wastewater,2020,36(12):37.
[3]张淏泉,程彦郡,仇淑宁,等.PVDF/BTO压电超滤膜制备及其抗污染机理[J].中国给水排水,2024,40(11):73.
　ZHANGHao-quan,CHENGYan-jun,QIUShu-ning,et al.Preparation of PVDF/BTO Piezoelectric Ultrafiltration Membrane and Its Antifouling Mechanism[J].China Water & Wastewater,2024,40(12):73.

更新日期/Last Update: 2025-06-17