LIZhi-chao,XIAONing,LINMan,et al.Application of MBBR Coupled with MBR Process in a Stringent Discharge Standard Wastewater Treatment Plant in Northeast China at Low Temperature[J].China Water & Wastewater,2022,38(14):77-83.
MBBR耦合MBR用于东北某低温高排放标准污水厂
- Title:
- Application of MBBR Coupled with MBR Process in a Stringent Discharge Standard Wastewater Treatment Plant in Northeast China at Low Temperature
- Keywords:
- MBBR; MBR; suspended carrier; biofilm; stringent discharge standard; low temperature; membrane fouling
- 摘要:
- 长春市某污水厂现状执行一级A排放标准，处理工艺为A2/O+MBR，现要求同时提标提量，出水水质需提升至地表水准Ⅲ类标准，处理规模由2.5×104 m3/d提升至6×104 m3/d。提标扩容项目的难点和核心在于低温下实现高标准排放，综合考虑进出水水质和现有工艺运行情况，新建系统和现有设施改造均采用MBBR+MBR组合工艺。项目运行后出水水质稳定，其中出水氨氮均值为0.57 mg/L、TN均值为7.86 mg/L，在水质冲击和低温条件下出水仍可稳定达标。改造后MBR膜组件清洗周期延长50%，降低了运维成本。MBBR+MBR组合工艺脱氮负荷高、占地省、抗冲击能力强，适用于低温地区高排放标准污水处理厂改造或新建。
- Abstract:
- The present treatment process of a wastewater treatment plant in Changchun was A2/O and MBR, and the effluent quality was required to meet first level A discharge standard. Now, it is required to raise the discharge standard and treatment scale simultaneously: the effluent quality is required to upgrade to surface water quasi Ⅲ class standard, and the treatment scale should be raised from 2.5×104 m3/d to 6×104 m3/d. The key problem of the project is to achieve stringent discharge standard at low temperature. Considering the quality of influent and effluent and the operation of the existing process, the MBBR and MBR combined process was selected in both the new system and the upgrading project. The effluent quality was stable after the upgrading of the project. The average ammonia nitrogen in effluent was 0.57 mg/L, and the average TN in effluent was 7.86 mg/L. Under the condition of water quality shock and low temperature, the effluent quality still stably reached the discharge standard. After the upgrading, the cleaning cycle of MBR membrane module was extended by 50% and the operation and maintenance cost was reduced. The MBBR and MBR combined process has high nitrogen removal load, small footprint area and strong impact resistance, which is suitable for upgrading or new construction of stringent discharge standard wastewater treatment plant in low temperature regions.
相似文献/References:
[1]熊建英.MBBR+磁混凝工艺用于污水处理厂提标改造[J].中国给水排水,2018,34(20):50.
XIONG Jian ying.Application of MBBR + Magnetic Coagulation Process for Upgrading of Wastewater Treatment Plant[J].China Water & Wastewater,2018,34(14):50.
[2]茹春,张爽,路晖,等.低温条件下污水处理厂的除污效果及运行调控分析[J].中国给水排水,2021,37(9):1.
RU Chun,ZHANG Shuang,LU Hui,et al.Pollutants Removal Performance and Operation Regulation of Urban Wastewater Treatment Plant under Low Temperature Condition[J].China Water & Wastewater,2021,37(14):1.
[3]彭江喜,李益飞,肖涛,等.MBBR工艺用于南昌市某污水处理厂提标改造工程[J].中国给水排水,2021,37(14):85.
PENG Jiang-xi,LI Yi-fei,XIAO Tao,et al.Application of MBBR Process in an Upgrading and Reconstruction Project of a Sewage Treatment Plant in Nanchang[J].China Water & Wastewater,2021,37(14):85.
[4]刘影.MBBR、双填料滤池、MBR用于污水厂多期同步扩容提标[J].中国给水排水,2021,37(18):63.
LIU Ying.Applications of MBBR, Double Packing Media Filter and MBR in Multi-phase Synchronous Expansion and Upgrading of Sewage Treatment Plant[J].China Water & Wastewater,2021,37(14):63.
[5]毛宇洛,石文鹏.江西某厂网一体化项目污水厂调试运行实例[J].中国给水排水,2022,38(4):12.
MAO Yu-luo,SHI Wen-peng.A Practical Example of Commissioning and Operation of a Wastewater Treatment Plant in a Plant?Network Integration Project in Jiangxi[J].China Water & Wastewater,2022,38(14):12.
[6]李一龙,包宇,邸文正,等.高排放标准下分段进水多级AO+MBR工艺的设计[J].中国给水排水,2022,38(4):76.
LIYi-long,BAOYu,DIWen-zheng,et al.Design of Step-feed Multi-stage AO+MBR Process under High Discharge Standard[J].China Water & Wastewater,2022,38(14):76.
[7]黄珠慧,朱艳臣,王久龙,等.混凝+两级A/O+MBR工艺处理粪便滤后液[J].中国给水排水,2022,38(24):115.
HUANGZhu-hui,ZHUYan-chen,WANGJiu-long,et al.Treatment of Fecal Filtrate by a Combined Process of Coagulation, Two-stage A/O and MBR[J].China Water & Wastewater,2022,38(14):115.
[8]刘浩,臧海龙,耿安锋,等.青岛李村河污水处理厂类Ⅳ类标准提标扩建工程设计[J].中国给水排水,2023,39(2):52.
LIUHao,ZANGHai-long,GENGAn-feng,et al.Design of Quasi Class Ⅳ Discharge Standard Upgrading and Expansion Project in Qingdao Licunhe Wastewater Treatment Plant[J].China Water & Wastewater,2023,39(14):52.
[9]田海成,杨红红,焦文海,等.AAO+MBR组合工艺各工段设计要点[J].中国给水排水,2023,39(6):71.
TIANHai-cheng,YANGHong-hong,JIAOWen-hai,et al.Key Points for Each Section Design of AAO and MBR Combined Process[J].China Water & Wastewater,2023,39(14):71.
[10]刘强,张磊.UASB+两级AO+MBR工艺处理高浓度原料药废水[J].中国给水排水,2023,39(10):139.
LIUQiang,ZHANG Lei.Engineering Design of UASB, Two-stage AO, and MBR Process for Treating High Concentration API Wastewater[J].China Water & Wastewater,2023,39(14):139.
[11]王凤雪,张新波,尚禹彤,等.MBBR—MBR对磺胺嘧啶的去除及膜污染特性[J].中国给水排水,2023,39(1):80.
WANGFeng-xue,ZHANGXin-bo,SHANGYu-tong,et al.MBBR-MBR System for Removal of Sulfadiazine and Its Membrane Fouling Characteristics[J].China Water & Wastewater,2023,39(14):80.
[12]黄青,杨平,杨忠启,等.MBBR和MBR工艺的污水处理效果与碳排放分析[J].中国给水排水,2023,39(16):99.
HUANGQing,YANGPing,YANGZhong-qi,et al.Analysis on the Engineering Effect and Carbon Emission of MBBR and MBR Processes for Treating Sewage[J].China Water & Wastewater,2023,39(14):99.