SUN Tong-qian,XU Zheng.Inspiration from Collaborative Application of BIM and GIS in Design of Sewage Treatment Plant[J].China Water & Wastewater,2021,37(20):66-70.
BIM与GIS的协同应用对污水处理厂设计的启示
- Title:
- Inspiration from Collaborative Application of BIM and GIS in Design of Sewage Treatment Plant
- Keywords:
- BIM; GIS; sewage treatment plant
- 摘要:
- 总结了BIM及GIS在污水处理厂设计中的应用特点，提出将二者协同应用于污水处理厂设计的意义及方向。以国内某全地下污水处理厂设计的实际应用为例，采用无人机扫描将数据导入ArcGIS，再将数据导入ArchiCAD生成地形模型，可以直观地反映出工程实施前后的土方变化，不仅能够完善土方平衡计算，还能通过软件内自带的造价计算系统为精准化施工提供依据。同时，针对污水处理厂后期运营的生产路线，将BIM建模引入GIS导航，可以模拟运营过程中巡检维护等可视化场景，为运维阶段提供参考。
- Abstract:
- Application characteristics of BIM and GIS in design of sewage treatment plant were summarized, and significance and direction of collaborative application of BIM and GIS in the design of sewage treatment plant were pointed out. In design of an underground sewage treatment plant, the data were imported into ArcGIS by unmanned aerial vehicle scanning, and then imported into ArchiCAD to generate the terrain model. The method directly reflected the earthwork changes before and after the implementation of the project, which not only improved the earthwork balance calculation, but also provided a basis for accurate construction through the cost calculation system in the software. At the same time, BIM modeling was introduced into GIS navigation to optimize the production route for the later operation of the sewage treatment plant, which could simulate the visual scene of inspection and maintenance in the operation process, and provide reference for operation and maintenance stage.
相似文献/References:
[1]王浩程,王琳,卫宝立,等.基于GIS技术的污水处理厂选址规划研究[J].中国给水排水,2020,36(11):63.
[2]许乃星,陈奕,林显治,等.基于BIM技术的大尺度海绵城市建设三维模型快速创建[J].中国给水排水,2020,36(12):111.
XU Nai-xing,CHEN Yi,LIN Xian-zhi,et al.Research on 3D Model Rapid Creation of Large Scale Sponge City Construction Based on BIM Technology[J].China Water & Wastewater,2020,36(20):111.
[3]张杰.基于Civil 3D二次开发的市政管线综合BIM辅助设计[J].中国给水排水,2020,36(24):79.
ZHANG Jie.BIM Aided Design for Municipal Pipeline Integration Based on Civil 3D Secondary Development[J].China Water & Wastewater,2020,36(20):79.
[4]蔡甜,王佳.排水模型和GIS模糊综合评价在内涝风险评估中的应用[J].中国给水排水,2021,37(11):117.
CAI Tian,WANG Jia.Application of Drainage Model and GIS Fuzzy Comprehensive Evaluation in Waterlogging Risk Assessment[J].China Water & Wastewater,2021,37(20):117.
[5]文雅,孟依柯,汪传跃,等.基于BIM平台的海绵城市系统优化设计及评估[J].中国给水排水,2021,37(12):98.
WEN Ya,MENG Yi-ke,WANG Chuan-yue,et al.Optimal Design and Assessment of Sponge City System Based on BIM[J].China Water & Wastewater,2021,37(20):98.
[6]张引玉.污水处理厂通水调试BIM可视化仿真系统应用[J].中国给水排水,2021,37(14):69.
ZHANG Yin-yu.Application of BIM Visualized Simulation System in Water Commissioning of Sewage Treatment Plant[J].China Water & Wastewater,2021,37(20):69.
[7]汪宙峰,徐建伟,龙沁洪,等.基于GIS的污水管网易爆气体时空分布特征研究[J].中国给水排水,2021,37(15):63.
WANG Zhou-feng,XU Jian-wei,LONG Qin-hong,et al.Temporal and Spatial Distribution Characteristics of Explosive Gas in Sewage Pipe Network Based on GIS[J].China Water & Wastewater,2021,37(20):63.
[8]龙程理,李璐,陈燕波,等.BIM技术在武汉南湖初雨处理厂设计中的应用[J].中国给水排水,2021,37(18):82.
LONG Cheng-li,LI Lu,CHEN Yan-bo,et al.Application of BIM Technology in the Design of Wuhan Nanhu Initial Rainwater Treatment Plant[J].China Water & Wastewater,2021,37(20):82.
[9]李兵,方玉妹,汪深.基于BIM技术的医院室外管网正向设计应用[J].中国给水排水,2021,37(20):71.
LI Bing,FANG Yu-mei,WANG Shen.Application of BIM Technology in Forward Design of Hospital Outdoor Pipe Network[J].China Water & Wastewater,2021,37(20):71.
[10]赵立佳,刘涛,汪波,等.BIM及数字化用于仙居县污水处理二期EPC工程[J].中国给水排水,2022,38(22):54.
ZHAOLi-jia,LIUTao,WANGBo,et al.Application of BIM and Digitalization Technologies in Xianju County Wastewater Treatment Plant Phase Ⅱ EPC Project[J].China Water & Wastewater,2022,38(20):54.